Zesto Audio Andros II

The Andros Inspired by RCA’s vacuum tube circuit designs from the 1930s, the Andros has been engineered to bring you the clarity and depth of the original recording. Your highs will be crisp but not overly emphasized, your midranges clear and present without being shrill and your lows full and firm without being boomy. Key Features The Circuit is specifically designed to provide sufficient amplification to match your cartridge with the rest of your system. Each unit is hand built “Made in the USA”. 50 hour factory burn in on all circuits and vacuum tubes. A low Noise level of -80 dBv below maximum output allows the quietest passages of you music to be heard. The output circuit is designed to drive your cables and isolates the output from the influence of the next stage. RCA connectors are high quality, Gold plated, recessed with an isolated ground. Isolated ground RCA connectors plus the Ground On/Off switch will allow you to choose the best ground configuration. Recessed RCA connectors are durable and will hold up to the typical Audiophile who loves to change their configuration. All switches and knobs are easily accessible, nothing hidden inside to adjust. Two position MM switch 47K and 15K Ohms to accommodate more cartridges. 10 position MC load switch from 20 to 1000 Ohms and more in the sweet spot above 200. Accommodates both high and low MC output cartridges Elegantly designed 16 gauge steel enclosure to help isolate the electronic “chatter” from nearby equipment. On/Off power switch conveniently mounted on front side panel Easy to read large type on back panel Specifications: Inputs per channel Separate MM and MC inputs MM/MC switch MM impedance switch 47K or 15K Ohms MM capacitance 200pf MC Single Ended RCA with isolated ground or Balanced XLR3F MC ground on/off switch MC load impedance adjustable 1000, 800, 600, 500, 400, 300, 200, 100, 50, 20 Ohms MC Internal step up transformers MC High/Low switch with ~ -3dB gain for high output MC cartridges Outputs per channel Impedance 10K ohms +8.5V max output level Active Components Four (4) Gold pin JJ ECC83S/12AX7 vacuum tubes with high quality gold pin ceramic sockets Power Newly designed internal power supplies using Toroidal transformers, 1 high voltage 300V and 1 low voltage 12V Ground binding post Power consumption 24W , 0 drain when off Voltage 100 to 120V AC 60Hz Optional factory installed 220V to 240V AC 50/60Hz Standard 3 pin IEC power connector ON/OFF power switch conveniently located on the front side Detailed Specifications Gain MM input 47dB Gain MC input 67dB Noise – 80dBv below max output level Frequency response complies with the original RIAA curve within +or- 0.5 dB RIAA curve is achieved using a passive filter 1% metal film resisters throughout Polypropylene capacitors throughout the audio path Other Features “Made in the USA” using US and imported parts Each unit is built by hand 50 hour factory burn in on all circuits and vacuum tubes Dimensions 17″ W X 12″ D X 5″ H Weight 20 lbs. 16 gauge zinc plated steel enclosure Two year limited warranty Six months warranty on Vacuum Tubes