Reed 5A

Reed 5A tonearm introduced as angling- 90o -tangential-pivot-tonearm, it is based on Double Birch/Thales geometry and will complement our tangential tonearm lineup. Armtube suspension system is similar to the one used in Reed 3P tonearm. Tonearm’s back link uses low-noise ceramic rolling bearings. Lever uses low-noise ceramic rolling bearing and rests on the sapphire – molybdenum carbide thrust bearing. Sapphire – molybdenum carbide thrust bearings are also used for tonearm’s front link, vertical and horizontal axes. Tonearm has VTA and azimuth setup and can be configured with Reed or SME (universal headshell connector) headshells. To make sure tonearm setup is precisely horizontal, tonearm has integrated level and horizontal plane adjuster. Comparing to regular pivot tonearms, Reed 5A does not require antiskating and has much less absolute tracking error (max. tracking error is +/- 4 Minute of Angle (MOA) Comparing to other tangential tonearms, Reed 5A does not require any additional devices to work (e.g. compressors, electronic controllers), is compact and can be easily mounted on a wide range of turntables. SPECIFICATIONS Mounting distance 251 mm (platter diam.max.= 330 mm) Tracking error +/- 4 Minute of Angle (MOA) Effective mass 10g -16 g depends on the armwand material Height adjustment compatible with 26÷46 mm height platters VTA adjustment precision +/- 0.2 mm Azimuth adjustment +/- 8 deg Downforce range 10÷30 mN (cartridge mass 5.5 g – 19.5 g,(4.0 g – 25,0 g)) Offset angle, overhang 0 deg, 0 mm Integrated level, accuracy +/- 2 mm/m